Table of contents
Overview
Each week we invite community members to help test RNode.
- When - Tuesdays at 14:00 UTC
- Where - This meeting takes place online using Zoom
- Join from PC, Mac, Linux, iOS or Android: https://zoom.us/j/134156866
- Or iPhone one-tap :
US: +16468769923,,134156866# or +16699006833,,134156866# - Or Telephone:
Dial(for higher quality, dial a number based on your current location):
US: +1 646 876 9923 or +1 669 900 6833
Meeting ID: 134 156 866
International numbers available: https://zoom.us/u/rDfBtpt
- Additional communications are posted in #node-testing on the RChaing Discord.
What you can expect this week
We will be testing the network and blockchain with changes made with RHOL-526 - Getting issue details... STATUS .
The Deploy call has been updated to now require a purse (containing payment for deployment), along with other parameters. Michael Birch will demonstrate how the deploy call works now. Node Operators should expect to attempt a deploy of tut-hello.rho, followed by a block proposal.
Also, this updated RNode now includes a configuration file with the completion of CORE-512 - Getting issue details... STATUS .
Steps for testing
- Testers will create a network of peers
- Several testers will slowly deploy a hello world contract and propose a block
- Testers will report on the number of blocks received
- We will watch to see if the number of blocks received syncs and becomes common to all peers on the network.
- If possible a node will join after some blocks have been proposed, and observe a more efficient mechanism of obtaining historical block data.
Configure your network
See RNode supported network configuration for information on how to configure your network to connect to other nodes.
Installation packages
Please install RNode prior to the start of the testing session. If you have run RNode previously please see CORE-961 - Getting issue details... STATUS and CORE-963 - Getting issue details... STATUS for support for resolving issues you may experience preventing the successful running of RNode today.
RNode version for this session
We plan to test RNode based on the master branch of https://github.com/rchain/rchain. This branch updated on Aug. 7 at 00:15 UTC.
Binary packages (.deb, .rpm, and .tgz) are available at https://repo.pyr8.io/rchain/downloads/master/
Docker image
rchain/rnode:master
Note - At this time RNode does not run successfully in Docker on MacOSX or Windows. See the User guide for running RNode for more information.
Installation and running instructions
Please see User guide for running RNode for installation and running instructions.
Other requirements
Select a validator key
https://docs.google.com/spreadsheets/d/18merD3OzaDk7nmxQ78SUZBzWLbxA-aOnmcdxpXrp_U0/edit#gid=0
Pick out a an unclaimed row with a validator key pair
Specify your node if you want. You can wipe your information after testing
Use new deploy command
This is an updated since last week's test.
deploy --from "0x1" --phlo-limit 0 --phlo-price 0 --nonce 0 <path of file to be deployed>
Bootstrap node address
We are using the master bootstrap node today. Please use the shown on RNode bootstrap addresses.
Share your experience
You best support the improvement and development of the RChain platform when you file a bug to report challenge you faced or unsuccessful outcomes. This will help us collect all relevant information to better understand your setup and experience.
Testing session summary
We tested block synchronization across the network. Success with this. Assertion errors emerged. Please see bug list below. Highest peer count = 22. Tested killing a node after a propose and restarting and proposing to observe equivocation.
Bugs filed